LED Lights Professional Car Spray Booth , Auto Body Paint Booth
1, 7.5KW centrifugal fan for intake, 7.5KW centrifugal fan for
2. All panels are tongue and groove interlock structure.
3, #304 stainless steel heat exchanger.
4, All LED lights, energy save and more illumination.
5, Color white, blue, orange and red is optional.
6, OEM available.
In painting, outside fresh air comes into the heating generators
through the pre-filter system, and enters into the plenum, then
filtered by ceiling filter and into the both which brings clean,
symmetrical and steady-going down airflow for spraying, After
painting, hot air goes from heating generators to plenum, then
enters room after filtered by ceiling filter, hot air circulation
providing heat that is necessary for baking of cars surface. .
|Inside dimension||6900×4500×3200 mm (L×W×H)|
|Outside dimension||7000×6200×3950mm (L×W×H)|
|Front door||Folding door, 3 folds, 3000×3000 mm (W×H), without frame, aluminium
alloy window frame, blue colour, door head and two batten on both
sides white colour. With two handles outside.|
|Emergency door||1 units, 650×1800mm (W×H), colour: white. Step silver color.|
|Basement||Galvanized steel assemble, 300mm high, quadrate steel support, with
one extra supportor, 2 rows grilles made by flat bar and twisted
steel, galvanized, 3 rows indented plate, silver colour, 2 ramps,
750×2000mm/pc, silver colour.|
|Wall panel||Thickness: 50mm, width:1150mm, tongue and groove structure, 0.426mm
colour steel with EPS inside, colour: white.|
|Light||Ceiling Lights: 8Units×4Pcs=32Pcs×36W, side lights:
8Units×2Pcs=16Pcs×18W, with LED, lighting boxes are powered coated,
|Generator cabinet||Intake from back upper, exhaust from rear upper, galvanized steel
frame; blue machine-made panel covered, filled with heat
preservation material inside.|
|Intake and Exhaust system||Inlet:1×7.5KW centrifugal fan, with belt drive, TAE500H, air
capacity for each fan: 25000m3/h.|
|Outlet: 1×7.5KW centrifugal fan, with belt drive, TAE500H, air
capacity for each fan: 25000m3/h. Manual damper, 4m ducts, 1 pcs 900 bend, 1 pcs 300 bend.|
|Heating system||Italy RIELLO G20 diesel burner, stainless steel heat exchanger,
pneumatic damper actuates from spraying to baking cycle. Max.
heating productivity: 200000kcal/h, max temperature: 80℃, 4pcs
chimney, 1 pcs bend.|
|Purification system||Pre-filter, ceiling filter, fibreglass filter, activated carbon
|Control system||Spraying, heat spraying, baking, time setting, lighting switch,
failure indicator, thermostat, power supply switch, emergency stop,
temperature limiter, all motors is normal start.|
17.5KW (Power supply 1×220V, 3×380V, 50HZ)