Workshop Full Down Draft Infrared Paint Booth Combined Prep Station
1, Spray booth: 5.5KW turbo fan for intake, 5.5KW turbo fan for
2, Prep station: 5.5KW turbo fan for intake and exhaust.
3. Air units at back side.
4, Two sets booth side by side.
5, All LED lights, energy save and more illumination.
6, Color white, blue, orange and red is optional.
7, Down draft and rear side draft.
Special for the 4S body shop, continue line if needed, air flow
from back side, intake and suction units from complete basement,
down draft, two units side by side, option for the electric shutter
door between two booth, and rail on the floor, car moveable from
one booth to another. Specification as below for one unit only.
|Inside dimension||6900×3900×2650 mm (L×W×H)|
|Outside dimension||8350×4000×3400mm (L×W×H)|
|Front door||Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium
alloy window frame, blue colour, door head and two batten on both
sides white colour.|
|Emergency door||1 units, 650×1800mm (W×H), colour: white.|
|Basement||Galvanized steel assemble, 300mm high, quadrate steel support, two
lines grilles made by flat bar and twisted steel, full ramps.|
|Wall panel||Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm
colour steel with EPS inside, colour: white.|
|Light||Ceiling Lights: 8Units×4Pcs=32Pcs×16W, side lights option, with
LED, lighting boxes are powered coated, illumination ≥1000LUX|
|Generator cabinet||Intake from back upper, exhaust from rear upper, galvanized steel
frame; blue machine-made panel covered, filled with heat
preservation material inside.|
|Intake and Exhaust system||Inlet:1×5.5KW turbo fan, air capacity for each fan: 18000m3/h.|
|Outlet: 1×5.5KW turbo fan, air capacity for each fan: 18000m3/h.
Manual damper, 4m ducts, 1 pcs 900 bend, 1 pcs 300 bend.|
|Heating||8 sets infrared heating, 3kw/set, 1kw/pcs, total 24kw.|
|Filtering system||Pre-filter, ceiling filter, fibreglass filter, activated carbon
|Control system||Spraying, baking, time setting, lighting switch, power supply
switch, emergency stop, all motors is normal start.|
|Total power||35.5KW (Power supply 1×220V, 3×380V, 50HZ)|
|Inside||6300×3450×2650 mm (L×W×H)|
|Plenum||6300×3450×450 mm (L×W×H)|
|Room body||Back side EPS wall panel, the other sides PVC curtain.|
|Light||Ceiling Lights: 8Units×4Pcs=32Pcs×36W, with LED, lighting boxes are
|Generator cabinet||Exhaust from back side, galvanized steel frame; white machine-made
panel covered, filled with heat preservation material inside.|
|Intake and Exhaust system||1×5.5KW turbo fan, air capacity: 18000m3/h, with electric damper.|
|Purification system||Pre-filter, ceiling filter, fibreglass filter.|
|Control system||Fan switch, lighting switch, emergency stop.|
|Installs way||Supported by steel column.|
|Total power||6.7KW (Power supply 1×220V, 3×380V, 50HZ)|